RDN Manufacturing Co., Inc.
160 Covington Drive
Bloomingdale, IL 60108

Phone: 630.893.4500
Fax: 630.893.5010
Email: info@rdnmfg.com
Website: www.rdnmfg.com
Print Back
Rugged Two and Four Belt Pullers for Maximum Productivity
  • For Use Where High Vacuum or Long Tooling Is a Must; Ideal for Heavy Walled Profile and Pipe
  • Totally Enclosed Belt Guards to Ensure Operator Safety
  • Four Speed Transmission for a Wide Variety of Speed Ranges
  • Non-Marking, Continuous Poly "V" Groove Traction Belts For Clean Contact with Extrudate
  • Pneumatic Upper Belt Operation for Ease Of Use
Model 140 Heavy-Duty Belt Pullers
Model 440 Heavy-Duty Belt Pullers
Unit of Measure
Items 140 Heavy Duty Belt Puller Front View - Shown With Customer Specified Guarding
140
140, Heavy-Duty Belt Pullers 		148 Heavy Duty Belt Puller Front View - Shown With Customer Specified Guarding
148
148, Heavy-Duty Belt Pullers 		160 Heavy Duty Belt Puller Front View - Shown With Customer Specified Guarding
160
160, Heavy-Duty Belt Pullers 		440 Heavy Duty Belt Puller - Guard Removed View
440
440, Heavy-Duty Belt Pullers
Hard Working Pullers with Added Safety Features N/A RDN's Heavy-Duty Belt Pullers are built with heavy, welded steel and bolted construction. Each machine features totally enclosed belt guards, an emergency stop button, and safety stickers for safe operation. Removable panels and hinged doors allow easy access for inspection and maintenance. Adjustable height jack screws and swivel casters are also provided.
Two Belt Pullers Provide Maximum Pulling Force N/A Utilizing non-marking poly "V" belts, these Heavy-Duty Belt Pullers are designed to provide balanced loading for belt closing, so that higher closing forces can be achieved. A pressure regulator with gauge is also included for setting the belt closing force. Lubricated-for-life, sealed ball bearing rollers (located between the drive and take-up pulleys on each belt assembly) ensure maximum contact with the extrudate.

The top take-up frame is supported by brackets on each side of the frame at both ends of the machine. This design provides balanced loading for belt closing creating higher closing forces.
Four Belt Pullers Are Ideal for Pipe Applications N/A The top belt assembly and horizontal assembly on the backside of the machine are pneumatically actuated. Since all belts close independently the machine will operate in the following modes: 2-belt vertical puller, 2-belt horizontal puller or 4-belt puller. Lubricated for life sealed ball bearings rollers between the drive and take-up pulleys on each belt assembly assures maximum contact to the extrudate.
Number of Belts N/A 2 N/A 2 N/A 2 N/A 4
Belt Drive N/A 3 HP A.C. Vector Drive Optional: 5 HP A.C.
Belt Height N/A 42" ± 2"
Maximum Belt Opening N/A 8 in N/A 8 in N/A 8 in N/A 12 in
Belt Contact Length N/A 40 in N/A 48 in N/A 60 in N/A 40 in
Belt Width N/A 6 in8 in12 in18 in N/A 6 in8 in12 in18 in N/A 6 in8 in12 in18 in N/A 3 in
Belt Speed N/A Customer Specified
Power Supply N/A 208 to 230 V / 3 Ph / 60 Hz Optional: 460 V / 3 Ph / 60 Hz
Floor Dimensions (Length) N/A 68 in N/A 76 in N/A 88 in N/A 84 in
Floor Dimensions (Width) N/A 30" for up to 12" wide belt 36" for over 12" wide belt N/A 30" for up to 12" wide belt 36" for over 12" wide belt N/A 30" for up to 12" wide belt 36" for over 12" wide belt N/A 52 in
Industries Served N/A Automotive Custom Pipe Housing and Construction Retail N/A Automotive Custom Pipe Housing and Construction Retail N/A Automotive Custom Pipe Housing and Construction Retail N/A Custom Pipe Housing and Construction Retail
Note N/A A wide variety of options are available. Specifications subject to change without notice.